Công ty Precision Fukuhara Works|Là nhà sản xuất máy dệt kim tròn ở Kobe tự hào là thị phần thuộc hàng top đầu trên thế giới.

Revision History of FMC20

ULM

Version (Revision )
No.
DateContents
1.40 090728
 
2009/07/28Changed:
A USB flash memory stick can now be used.

1.30 060315
 
2006/03/15Fixed:
If the type of WAC actuators on machines equipped with WAC actutors except VX-JSEWS is changed to 3-wire type, “ACTUATOR ERROR” is displayed.

1.30 050107
 
2005/01/07Fixed:
Patterns with parameter size exceeding 8192 bytes cannot be knitted. It is now possible up to the memory capacity.

1.30 010507
 
2001/05/07Changed:
Changed to the original software that is not showing “<<<” while loading pattern, because some pattern cannot be loaded correctly.

FMC

Version (Revision) No.DateContents
1.20 0906042009/06/04Changed:
Now compatible with electromagnetic striper actuators.
1.20 0603152006/03/15Fixed:
If the type of WAC actuators on machines equipped with WAC actuators except VX-JSEWS is changed to 3-wire type, “ACTUATOR ERROR” is displayed.
1.20 0501072005/01/07Fixed:
Patterns with parameter size exceeding 8192 bytes cannot be knitted. (“COM error” occurs due to time-out in pattern expansion.)  
1.20 0401232004/03/05Fixed:
There have been cases where FMC did not function after power failure due to the deteriorated battery in UPS. In order to solve this problem, modification to the software has been made so that whether the correct operation data is backed up, and, if not, the back-up ROM is forcibly cleared to prevent the software from getting uncontrollable.
1.20 0105072001/05/07Changed:
Changed to the original software that is not showing “<<<” while loading pattern, because some patterns cannot be loaded correctly.